Bring a touch of timeless elegance to your holiday décor with this DIY Brass Bow Candle Pin or Tree Ornament, inspired by Matilda Goad & Co. This cute DIY project fulfils my DIY bow candle dreams and is the perfect accompaniment to the taper candles that I painted with bows! Using upcycled tomato puree tubes and a bit of creativity, you can recreate this stunning accessory for your candles. This project is not only budget-friendly but also eco-conscious, as it gives a new life to discarded materials. Plus, with a free printable template included, it’s never been easier to craft your own!
The bow trend is everywhere this Christmas and I am all for it. I have red velvet bows on my candle holders, DIY bow candles and now these DIY Mini Brass Bow Candle pins and mini brass bow tree decorations.
Safety Notes:
- Always supervise a burning candle and keep them away from flammable decorations. Remove your candle pin before burning that far down the candle.
How to Make DIY Mini Brass Bow Candle Pins
What You’ll Need
- Tomato puree tubes (cleaned and flattened)
- Free printable bow template (At the bottom of the post)
- Scissors
- Fine-tipped marker or nail tools for marking
- Strong adhesive or hot glue gun
- Brass spray paint or gold polish (optional, for added shine)
- Drawing pins
- Protective gloves
- Sandpaper (optional, for smoothing edges)
Now I am going to admit I have been saving my tomato puree packaging for a year! But if you haven’t, don’t worry. You will get two pins from one tube or you can buy some sheets of crafting brass or as it is officially called embossing foil.
This post contains affiliate links. If you make any purchases after clicking one of these links, I will make a small commission (hopefully enough to keep me in tea all year) – at no extra cost to you! This allows me to keep creating and sharing free tutorials and content for you. Thank you!
No products found.
Step-by-Step Instructions
1. Download & Prepare the Template
Start by downloading and printing the free bow template (available below). This will help you achieve the perfect bow shape without any guesswork.
2. Prep Your Tubes
Carefully open and clean the tomato puree tubes. Flatten the metal sheet and smooth out any creases using the back of a spoon.
3. Trace the Template
Place the bow template on the flattened metal sheet and use a pencil or wooden screwer to trace the shape.
4. Cut Out the Bow
Using scissors, carefully cut along the traced lines. Take your time, as the metal can be sharp. Sand down the edges if needed to make them smooth.
5. Shape the Bow
Gently fold and shape the bow to give it a three-dimensional look. Use the template as a guide for where to fold and bend the metal. use a small amount of hot glue or glue to keep iit n place.
6. Attach the Candle Pin
Use strong adhesive or metal glue to attach a drawing pin to the back of your bow. Allow it to dry completely before handling.
7. Attach string to hang from the Tree.
Alternatively, to using the mini brass bows as candle pins you can omit the drawing pin and add some tine instead to hang them, from your tree.
8. Decorate Your Candles
Once your brass bow is ready, pin it into a candle. If your candle wax is hard then carefully heat the tip of the drawing pin before pushing it in. I held mine over a tealight flame for 2 seconds.
These elegant accessories are perfect for holiday tablescapes, mantels, or even as thoughtful handmade gifts.
Tips for Customisation
- Add texture: Use a textured surface to press patterns into the metal before shaping it.
- Add Colour: If the brass look isn’t to your taste then why not paint them red or another colour to match your seasonal decor? You need to use acrylic paint for this.
- Try patina: For a vintage look, let the brass naturally age or apply a patina finish.
- Make Tree Ornaments: Add a piece of thread instead of the drawing pin to hang them from your tree – these were inspired by Geneva Vanderzeil (I have had this saved for a year)!
Free Printable Bow Template
These printables are offered for your non-commercial personal use only. Mass-production of this printable is not permitted, even for non-profit purposes. Please do not upload the Bow templates to other sites – instead, if you want to let people know about these freebies, post a link to this page. Pinning is okay as long as the pin links back to this page. Thanks!
All you need to do is add click on add to cart and the free printable page will be added to your shopping cart. When you are finished click on the orange cart menu at the top right of your page and follow the instructions on the screen. You will not be charged and the free pdf file will be available for you to download immediately and will also be emailed to your inbox.
-
Mini Bow Template$0.00
This DIY Brass Bow Candle Pin is a beautiful way to add a luxurious, handmade touch to your décor. Inspired by the charm and elegance of Matilda Goad & Co., it’s a unique project that combines upcycling and artistry. With just a few materials, you’ll create a show-stopping detail that looks high-end but costs next to nothing.
Share Your Creations!
We’d love to see how your brass bows turn out! Tag us on Instagram or Pinterest and show us how you’ve styled them in your home.